Your commercial building probably has a lot of glass. This makes it pretty and gives your employees the ability to see out and admire nature. They also get dirty. This is because of the wind, blowing and the rain depositing debris and soils on them. You will need to have them cleaned by someone and, if you have a taller than normal building, will need to hire high rise window cleaners.
You have probably seen window jockeys who clean the glass on the first floors of many buildings. Many of them will also address the second and third floors. This is usually accomplished by the use of long poles, often with containerized water and cleansing solution. Getting to the second or third floors may require the use of scissor lifts, if on a fairly flat ground level or sidewalk.
Floors above the third can be cleaned by using a boom truck. This is a machine that has large tires and can get into position to lift a cleaner up higher than a pole or a scissor lift can. Anything higher than what can be reached by these pieces of equipment are termed high rise and need specialized training and some fairly complicated rigging.
Most high rise buildings have the anchors needed already located on the roof and take many forms. One of the most unpopular rigging is that which allows for the cleaners repelling down the side of the building. You may have seen these rigs with a window cleaner in them. They are composed of a set of ropes and chains which suspend a type of chair. This is usually a flexible bucket that will hold the expert securely.
The ropes are secured to an anchor, set in the roof of the building. The set up has a block and tackle that will allow the rope to be fed down and holds the rope, securely. The cleaner has another block, located at his level with a lock that can secure the chair at any height he desires.
Another system will be the type that lowers a gondola in a similar manner. The anchor, on the roof, is more complicated, however, it still consists of a set of pulleys that cause the moving of the ropes through a wench system. The gondola can be as small as a one person platform or as big as one holding two or three personnel. This system will also have a lock, for the ropes, so it can be positioned to clean one floor before being moved to the next lower floor.
It does not matter what is used to get the cleaners up to the right level or down to the appropriate height. What does matter is that all of the cleaning is done in about the same way. The number of tools is the same and the process is the same. The tools consist of a wet bar, a bucket, a cloth or two and a squeegee. Many cleaners will also include a window knife for sticky substances.
The glass is made wet with the wet bar and scraped, if needed, with the knife. After this, it will probably be scrubbed, again, with the wet bar. The show, that many people stop and watch is the use of the squeegee. This is usually a very graceful swoop of the squeegee from the upper left, down the glass, through a swooping motion and finishing on the bottom and wiped with the cloth.
You have probably seen window jockeys who clean the glass on the first floors of many buildings. Many of them will also address the second and third floors. This is usually accomplished by the use of long poles, often with containerized water and cleansing solution. Getting to the second or third floors may require the use of scissor lifts, if on a fairly flat ground level or sidewalk.
Floors above the third can be cleaned by using a boom truck. This is a machine that has large tires and can get into position to lift a cleaner up higher than a pole or a scissor lift can. Anything higher than what can be reached by these pieces of equipment are termed high rise and need specialized training and some fairly complicated rigging.
Most high rise buildings have the anchors needed already located on the roof and take many forms. One of the most unpopular rigging is that which allows for the cleaners repelling down the side of the building. You may have seen these rigs with a window cleaner in them. They are composed of a set of ropes and chains which suspend a type of chair. This is usually a flexible bucket that will hold the expert securely.
The ropes are secured to an anchor, set in the roof of the building. The set up has a block and tackle that will allow the rope to be fed down and holds the rope, securely. The cleaner has another block, located at his level with a lock that can secure the chair at any height he desires.
Another system will be the type that lowers a gondola in a similar manner. The anchor, on the roof, is more complicated, however, it still consists of a set of pulleys that cause the moving of the ropes through a wench system. The gondola can be as small as a one person platform or as big as one holding two or three personnel. This system will also have a lock, for the ropes, so it can be positioned to clean one floor before being moved to the next lower floor.
It does not matter what is used to get the cleaners up to the right level or down to the appropriate height. What does matter is that all of the cleaning is done in about the same way. The number of tools is the same and the process is the same. The tools consist of a wet bar, a bucket, a cloth or two and a squeegee. Many cleaners will also include a window knife for sticky substances.
The glass is made wet with the wet bar and scraped, if needed, with the knife. After this, it will probably be scrubbed, again, with the wet bar. The show, that many people stop and watch is the use of the squeegee. This is usually a very graceful swoop of the squeegee from the upper left, down the glass, through a swooping motion and finishing on the bottom and wiped with the cloth.
About the Author:
You can visit www.vipspecialservices.com for more helpful information about High Rise Window Cleaners Put On A Show.
0 comments:
Post a Comment